[100% Pass Exam Dumps] Useful Cisco ICND2 200-105 Dumps Preparation Materials Latest Video Version PDF&VCE (From Google Drive)

Do you want to pass Cisco 200-105 dumps? Here are some good tips. “Interconnecting Cisco Networking Devices Part 2 (ICND2 v3.0)” is the name of Cisco 200-105 exam dumps which covers all the knowledge points of the real Cisco exam. Useful Cisco ICND2 200-105 dumps preparation materials latest video version pdf&vce. Pass4itsure understand the importance of gaining https://www.pass4itsure.com/200-105.html dumps Interconnecting Cisco Networking Devices exam certification and what it takes to successfully pass the 200-105 ICND2 exam dumps.

Exam Code: 200-105
Exam Name: Interconnecting Cisco Networking Devices Part 2 (ICND2 v3.0)
Updated: Sep 10, 2017
Q&As: 204

[100% Pass Cisco 200-105 Dumps From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWWWw0QXQxY3R1X1E

[100% Pass Cisco 300-320 Dumps From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWck1GZWpsWHY4ZU0

Pass4itsure 200-105 dumps exam questions answers are updated (204 Q&As) are verified by experts. The associated certifications of 200-105 dumps is ICND2.

200-105 dumps

Pass4itsure Latest and Most Accurate Cisco 200-105 Dumps Exam Q&AS:
Question No : 10 – (Topic 1)  Refer to the exhibit.

200-105 dumps

A technician has configured the FastEthernet 0/1 interface on Sw11 as an access link in
VLAN 1. Based on the output from the show vlan brief command issued on Sw12, what will
be the result of making this change on Sw11?
A. Only the hosts in VLAN 1 on the two switches will be able to communicate with each
B. The hosts in all VLANs on the two switches will be able to communicate with each other.
C. Only the hosts in VLAN 10 and VLAN 15 on the two switches will be able to
communicate with each other.
D. Hosts will not be able to communicate between the two switches.
200-105 exam Answer: D
VLANs are local to each switch’s database, and VLAN information is not passed between
switches without implementing VLAN Trunk Protocol (VTP). Trunks carry traffic from all
VLANs to and from the switch by default but, can be configured to carry only specified
VLAN traffic. Trunk links are required to pass VLAN information between switches. So
Sw11 port should be trunk not access port. Additionally, there are no ports assigned to

Question No : 11 – (Topic 1)  What are two characteristics of a 200-105 dumps switch that is configured as a VTP client? (Choose two.)
A. If a switch that is configured to operate in client mode cannot access a VTP server, then
the switch reverts to transparent mode.
B. On switches that are configured to operate in client mode, VLANs can be created,
deleted, or renamed locally.
C. The local VLAN configuration is updated only when an update that has a higher
configuration revision number is received.
D. VTP advertisements are not forwarded to neighboring switches that are configured in
VTP transparent mode.
E. VTP client is the default VTP mode.
F. When switches in VTP client mode are rebooted, they send a VTP advertisement
request to the VTP servers.
Answer: C,F
VLAN Trunking Protocol (VTP)
Server Mode Once VTP is configured on a Cisco switch, the default mode used is Server
Mode. In any given VTP management domain, at least one switch must be in Server Mode.
When in Server Mode, a switch can be used to add, delete, and modify VLANs, and this
information will be passed to all other switches in the VTP management domain.  Client Mode When a switch is configured to use VTP Client Mode, it is simply the recipient of any VLANs added, deleted, or modified by a switch in Server Mode within the same management domain. A switch in VTP client mode cannot make any changes to VLAN information.
Transparent Mode A switch in VTP Transparent Mode will pass VTP updates received by
switches in Server Mode to other switches in the VTP management domain, but will not
actually process the contents of these messages. When individual VLANs are added,
deleted, or modified on a switch running in transparent mode, the changes are local to that
particular switch only, and are not passed to other switches in the VTP management
Question No : 12 – (Topic 1)  Which term describes a spanning-tree network that has all switch ports in either the blocking or fowarding state?
A. converged
B. redundant
C. provisioned
D. spanned
Answer: A
200-105 pdf Explanation:
Spanning Tree Protocol convergence (Layer 2 convergence) happens when bridges and
switches have transitioned to either the forwarding or blocking state. When layer 2 is
converged, root bridge is elected and all port roles (Root, Designated and Non-Designated)
in all switches are selected
Question No : 13 – (Topic 1)
Refer to the exhibit.
200-105 dumps
Given the output shown from this Cisco Catalyst 2950, what is the reason that interface
FastEthernet 0/10 is not the root port for VLAN 2?
A. This switch has more than one interface connected to the root network segment in
B. This switch is running RSTP while the elected designated switch is running 802.1d
Spanning Tree.
C. This switch interface has a higher path cost to the root bridge than another in the
D. This switch has a lower bridge ID for VLAN 2 than the elected designated switch.
Answer: C
Explanation: These four parameters are examined in order to make root bridge , root port ,
designated port. Other switch has lowest Sending Bridge ID or Sending Port ID so vlan 2 is
not the root port.
1. A lower Root Bridge ID2. A lower path cost to the Root3. A lower Sending Bridge ID4. A
lower Sending Port ID
Question No : 14 – (Topic 1)
Refer to the exhibit.

200-105 dumps

Which two statements are true about interVLAN routing in the 200-105 dumps topology that is shown in the exhibit? (Choose two.)
A. Host E and host F use the same IP gateway address.
B. Router1 and Switch2 should be connected via a crossover cable.
C. Router1 will not play a role in communications between host A and host D.
D. The FastEthernet 0/0 interface on Router1 must be configured with subinterfaces.
E. Router1 needs more LAN interfaces to accommodate the VLANs that are shown in the
F. The FastEthernet 0/0 interface on Router1 and the FastEthernet 0/1 interface on
Switch2 trunk ports must be configured using the same encapsulation type.
Answer: D,F

Question No : 15 – (Topic 1) Refer to the exhibit200-105 dumps

Which switch provides the spanning-tree designated port role for the network segment that
services the printers?
A. Switch1
B. Switch2
C. Switch3
D. Switch4
Answer: C
First, the question asks what switch services the printers, so it can be Switch 3 or Switch 4
which is connected directly to the Printers.
Designated port is a port that is in the forwarding state. All ports of the root bridge are
designated ports.
Switch 3 and Switch 4 has same priority so it will see on lowest MAC address and here
switch 3 has lowest MAC address. So switch 3 segment will play a Designated port role.
By comparing the MAC address of Switch 3 and Switch 4 we found that the MAC of Switch
3 is smaller. Therefore the interface connected to the Printers of Switch 3 will become
designated interface and the interface of Switch 4 will be blocked.

Question No : 16.Which statement about deploying computer image files is true?
A.The RDeploy switch used to preserve existing partitions is enabled by default.
B.Aborting the deployment process (after imaging as started) corrupts the destination computer’s hard
C.The maximum space required on the destination hard drive is equal to the size of the image file.
D.The imaging process is non-destructive, and adds data to what is already stored on an existing hard
drive partition.
200-105 pdf Answer:B
Question No : 17.When capturing a computer’s personality, the application settings used for this process are located in
which file type?
Question No : 18 AClient (on a managed computer) has been configured to use a multicast packet to locate the Deployment Server. Which statement is now true?
A.moving this computer to a different Deployment System requires the AClient agent be reconfigured
B.images can be sent using unicast packets or multicast packets
C.this setting configures images to be sent to the computer using multicasting technology
D.the Deployment Server must be configured to obtain its IP address from a DHCP server
200-105 vce Answer:B
Question No : 19 .Which program lets you edit image files after they have been created?
Question No : 20.Deployment Agents (such as AClient) can be installed on remote computers using the Remote Agent
Installer, but only when the remote computers are running which four operating systems? (Choose four.)
A.Windows 2000
B.Windows 95
C.Windows NT
D.Windows XP
E.Windows 2003
G.Windows 98
200-105 exam Answer:A C D E
Question No : 21 .AClient has not been password protected. Which three tasks can be performed after right-clicking on the AClient icon from a managed computer? (Choose three.)
A.initiate Microsoft’s Sysprep Utility in preparation for imaging
B.view the AClient log file when log files have been enabled
C.change the name of the managed computer as it appears in the Deployment Console

D.change the NetBIOS name of the managed computer
E.monitor AClient’s communication with the Deployment Server
F.reinstall AClient
G.edit the AClient template file
Answer:B C E
Question No : 22.Which utility removes the security ID (SID) before making an image of a computer?
Question No : 23.How does a Deployment Solution job let you work with software 200-105 dumps virtualization layers? (Choose two.)
A.layers can be imported to a managed computer
B.layers can be created
C.the state of a layer can be managed (activated, deactivated, and so forth)
D.the content of a layer can be modified
Answer:A C
Question No : 24.Which required symbol identifies the opening and closing of a Deployment token?
Question No : 25.Deployment Solution’s Simple Install Helper will check for and install which required third-party
software? (Choose two.)
D..NET framework
E.Pre-boot automation operating systems
Answer:D F

That is why Pass4itsure offer something special for Candidates who are willing to take 200-105 dumps Cisco Certified Network Associate Routing & Switching exam, regardless if they’re already professionals or in the beginning stages of their https://www.pass4itsure.com/200-105.html dumps chosen careers.