Pass4itsure Cisco (CCNA, CCNP, Meraki Solutions Specialist, CCDP…) dumps updates throughout the year and share some exam questions for free to help you 100% pass the exam

[2021.3] Prep Actual Cisco 100-490 Exam Questions For Free Share

Valid Cisco 100-490 questions shared by Pass4itsure for helping to pass the Cisco 100-490 exam! Get the newest Pass4itsure Cisco 100-490 exam dumps with VCE and PDF here: https://www.pass4itsure.com/100-490.html (150 Q&As Dumps).

[Free PDF] Cisco 100-490 pdf https://drive.google.com/file/d/181ozOk9apg9PVhlKBTOncqMPvMIgQKSu/view?usp=sharing

Suitable for 100-490 complete Cisco learning pathway

The content is rich and diverse, and learning will not become boring. You can learn in multiple ways through the Cisco 100-490 exam.

  1. Download 
  2. Answer practice questions, the actual test

Cisco 100-490 Supporting Cisco Routing & Switching

Free Cisco 100-490 dumps download

[PDF] Free Cisco 100-490 dumps pdf download https://drive.google.com/file/d/181ozOk9apg9PVhlKBTOncqMPvMIgQKSu/view?usp=sharing

Pass4itsure offers the latest Cisco 100-490 practice test free of charge 1-13

QUESTION 1
What is the correct IPv6 address notation?
A. 2001:0DB8::/128
B. 2001:0DB8:0::
C. 2001:0DB8::1:1:1:1:1
D. 2001:0DB8:130F:0000:0000:7000:0000:140B
Correct Answer: D


QUESTION 2
From the enable mode, which command loads the configuration during the password recovery process on a Cisco
router?
A. load_helper
B. configure terminal
C. copy running-config startup-config
D. copy startup-config running-config
Correct Answer: D


QUESTION 3
The colored wires at one end of a cable are in reverse sequence to the colored wires at the other end of the cable.
Which cable does this configuration describe?
A. rolled
B. crossover
C. coaxial
D. straight-through
Correct Answer: B

QUESTION 4
Which two pieces of information are displayed when you use the show ip interface brief command? (Choose two.)
A. Layer 2 address
B. keepalive
C. Layer 3 address
D. encapsulation type
E. interface status
Correct Answer: CE

QUESTION 5
When you deploy Cisco Catalyst 3850 Series switches, which two modes of operation can you choose from?
A. Active mode and Standby mode
B. Install mode and Bundle mode
C. Boot mode and Run mode
D. Exec mode and User mode
Correct Answer: B

QUESTION 6
Which device is a DTE device?
A. CSU/DSU
B. router
C. cable modem
D. DSL modem
Correct Answer: B

QUESTION 7
Which two ports on a laptop are used to gain console access to a Cisco switch? (Choose two.)
A. DB-9
B. USB
C. DVI
D. RJ-11
E. RJ-45 Ethernet
Correct Answer: AB

QUESTION 8
What is the line speed of a DS0 in North America?
A. 16 kbps
B. 32 kbps
C. 64 kbps
D. 128 kbps
Correct Answer: C

QUESTION 9
Which address facilitates the routing of packets over an IP network?
A. physical
B. transport
C. network
D. MAC
Correct Answer: C

QUESTION 10
Which two commands are valid for copying a saved configuration to RAM? (Choose two.)
A. copy startup-config running-config
B. copy running-config startup-config
C. copy tftp running-config
D. copy running-config tftp
E. copy tftp startup-config
Correct Answer: AC

QUESTION 11
Which type of port on a laptop is used to connect to an Ethernet port on a Cisco switch?
A. DVI
B. RJ-11
C. DB-9
D. RJ-45
Correct Answer: D

QUESTION 12
Which set of steps best describes how to assign a static IP address to the Ethernet port on a computer?
A. From the Network and Sharing Center, click Internet Protocol (TCP/IP), and follow the New Connection Wizard
instructions.
B. From the Network and Sharing Center, click Change adapter, then double-click a local area connection. Select
Internet Protocol (TCP/IP) > Properties > Use the Following Address, and then configure the IP information.
C. Click Start. Enter cmd and click OK. Enter the IP address XXX.XXX.XXX.XXX.
D. From the Network and Sharing Center, double-click Local Area Connection. Select Properties > iPass Protocol (IEEE
802.1x) > Properties > Static IP.
Correct Answer: B

QUESTION 13
Which type of transceiver module is used for 40 Gigabit Ethernet connectivity?
A. SFP+
B. GBIC
C. QSFP+
D. XFP
Correct Answer: C
Reference: https://www.cisco.com/c/en/us/products/interfaces-modules/40-gigabit-modules/index.html#:~:text=The%20Cisco%20QSFP%20BiDi%20transceiver,10%20Gigabit%20Ethernet%20fiber%20infrastructure

Summarize:

[Q1-Q13] Free Cisco 100-490 pdf download https://drive.google.com/file/d/181ozOk9apg9PVhlKBTOncqMPvMIgQKSu/view?usp=sharing

Share all the resources: Latest Cisco 100-490 practice questions, latest Cisco 100-490 pdf dumps. Latest updated Cisco 100-490 dumps https://www.pass4itsure.com/100-490.html Study hard and practices a lot. This will help you prepare for the 100-490 exam. Good luck!