Pass4itsure Cisco (CCNA, CCNP, Meraki Solutions Specialist, CCDP…) dumps updates throughout the year and share some exam questions for free to help you 100% pass the exam

[2020.12] Cisco 200-301 Exam Prep Actual Dumps Questions For Free Share

Valid Cisco 200-301 dumps questions shared by Pass4itsure for helping passing Cisco 200-301 exam! Get the newest Pass4itsure 200-301 dumps with VCE and PDF here: https://www.pass4itsure.com/200-301.html (385 Q&As Dumps).

Suitable for 200-301 complete Cisco learning pathway

The content is rich and diverse, and learning will not become boring. You can learn in multiple ways through Cisco 200-301 exam.

  1. Download 
  2. Watch the video
  3. Answer practice questions, the actual test
Cisco 200-301 Exam Dumps Free

Free Cisco 200-301 dumps download

[PDF] Free Cisco 200-301 dumps download https://drive.google.com/file/d/1F-FlAeBawy15AHWn5ggDcHj_2F52LDws/view?usp=sharing

Cisco 200-301 exam video learning (YouTube)

Pass4itsure offers the latest Cisco 200-301 practice test free of charge 1-13

QUESTION 1
A Cisco IP phone receives untagged data traffic from an attached PC. Which action is taken by the phone?
A. It drops the traffic.
B. It allows the traffic to pass through unchanged.
C. It tags the traffic with the native VLAN.
D. It tags the traffic with the default VLAN.
Correct Answer: B
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960x/software/15-0_2_EX/vlan/configuration_guide/b_vlan_152ex_2960-x_cg/b_vlan_152ex_2960-x_cg_chapter_0110.pdf


QUESTION 2
Refer to the exhibit.

200-301 exam questions-q2

A network administrator is configuring an EtherChannel between SW1 and SW2. The SW1 configuration is shown.
What is the correct configuration for SW2?
A. interface FastEthernet 0/1 channel-group 1 mode active switchport trunk encapsulation dot1q switchport mode trunk
interface FastEthernet 0/2 channel-group 1 mode active switchport trunk encapsulation dot1q switchport mode trunk
B. interface FastEthernet 0/1 channel-group 2 mode auto switchport trunk encapsulation dot1q switchport mode trunk
interface FastEthernet 0/2 channel-group 2 mode auto switchport trunk encapsulation dot1q switchport mode trunk
C. interface FastEthernet 0/1 channel-group 1 mode desirable switchport trunk encapsulation dot1q switchport mode
trunk interface FastEthernet 0/2 channel-group 1 mode desirable switchport trunk encapsulation dot1q switchport mode
trunk
D. interface FastEthernet 0/1 channel-group 1 mode passive switchport trunk encapsulation dot1q switchport mode
trunk interface FastEthernet 0/2 channel-group 1 mode passive switchport trunk encapsulation dot1q switchport mode
trunk
Correct Answer: C
If the etherchannel was configured with mode “auto”, it was using PagP, so, we need to configure the other switch with
“desirable” mode.
PagP modes: auto | Desirable LACP modes: active | pasive

QUESTION 3
A network administrator enabled port security on a switch interface connected to a printer. What is the next configuration
action in order to allow the port to learn the MAC address of the printer and insert it into the table automatically?
A. enable dynamic MAC address learning
B. implement static MAC addressing.
C. enable sticky MAC addressing
D. implement auto MAC address learning
Correct Answer: C


QUESTION 4
What is the function of a server?
A. It transmits packets between hosts in the same broadcast domain.
B. It provides shared applications to end users.
C. It routes traffic between Layer 3 devices.
D. It Creates security zones between trusted and untrusted networks
Correct Answer: B

QUESTION 5
How does STP prevent forwarding loops at OSI Layer 2?
A. TTL
B. MAC address forwarding
C. Collision avoidance
D. Port blocking
Correct Answer: D


QUESTION 6
Refer to the exhibit. What commands are needed to add a subinterface to Ethernet0/0 on R1 to allow for VLAN 20, with
IP address 10.20.20.1/24?

200-301 exam questions-q6

A. R1(config)#interface ethernet0/0 R1(config)#encapsulation dot1q 20 R1(config)#ip address 10.20.20.1
255.255.255.0
B. R1(config)#interface ethernet0/0.20 R1(config)#encapsulation dot1q 20 R1(config)#ip address 10.20.20.1
255.255.255.0
C. R1(config)#interface ethernet0/0.20 R1(config)#ip address 10.20.20.1 255.255.255.0
D. R1(config)#interface ethernet0/0 R1(config)#ip address 10.20.20.1 255.255.255.0
Correct Answer: B


QUESTION 7
DRAG DROP

200-301 exam questions-q7

An engineer is tasked with verifying network configuration parameters on a client workstation to report back to the team
lead. Drag and drop the node identifiers from the left onto the network parameters on the right.
Select and Place:

200-301 exam questions-q7-2

Correct Answer:

200-301 exam questions-q7-3

QUESTION 8
A frame that enters a switch fails the Frame Check Sequence. Which two interface counters are incremented? (Choose
two.)
A. input errors
B. frame
C. giants
D. CRC
E. runts
Correct Answer: AD
QUESTION 9
Which goal is achieved by the implementation of private IPv4 addressing on a network?
A. allows servers and workstations to communicate across public network boundaries
B. provides a reduction in size of the forwarding table on network routers
C. allows communication across the Internet to other private networks
D. provides an added level of protection against Internet exposure
Correct Answer: A

QUESTION 10
Refer to the exhibit.

200-301 exam questions-q10

Which command provides this output?
A. show ip route
B. show cdp neighbor
C. show ip interface
D. show interface
Correct Answer: B


QUESTION 11
What mechanism carries multicast traffic between remote sites and supports encryption?
A. ISATAP
B. GRE over iPsec
C. iPsec over ISATAP
D. GRE
Correct Answer: D

QUESTION 12
Refer to the exhibit. Router R1 Fa0/0 cannot ping router R3 Fa0/1. Which action must be taken in router R1 to help
resolve the configuration issue?

200-301 exam questions-q12

A. set the default gateway as 20.20.20.2
B. configure a static route with Fa0/1 as the egress interface to reach the 20.20.2.0/24 network
C. configure a static route with 10.10.10.2 as the next hop to reach the 20.20.20.0/24 network
D. set the default network as 20.20.20.0/24
Correct Answer: C


QUESTION 13
Refer to the exhibit.

200-301 exam questions-q13

Which path is used by the router for internet traffic ?
A. 209.165.200.0/27
B. 10.10.10.0/28
C. 0.0.0.0/0
D. 10.10.13.0/24
Correct Answer: C

What customers say about Pass4itsure

Customers say

Latest discount code “2020PASS” – Pass4itsure

Pass4itsure discount code 2020

Summarize:

[Q1-Q13] Free Cisco 200-301 dumps download https://drive.google.com/file/d/1F-FlAeBawy15AHWn5ggDcHj_2F52LDws/view?usp=sharing

Share all the resources: Latest Cisco 200-301 practice questions, latest Cisco 200-301 pdf dumps, Cisco 200-301 exam video learning. Latest update Cisco 200-301 exam dumps https://www.pass4itsure.com/200-301.html Study hard and practices a lot. This will help you prepare for the 200-301 exam. Good luck!