Exampass – unlimited lifetime access to IT training Exams and Certifications in PDF and Exam Engine formats, along with 1800+ other exams and updates

Cisco CCNP 300-620 Exam Preparation Is Not Tough Anymore!

Cisco 300-620 dumps materials can help them pass the Cisco CCNP 300-620 exam! In IT, progress is happening faster than ever before. However, getting the best authentic Cisco 300-620 dumps preparation material for all of these candidates becomes quite difficult. Do you feel the same way?

Don’t be afraid, give you a trick: Choose Pass4itSure latest Cisco CCNP 300-620 exam dumps, proven to be 100% effective! Get complete Cisco CCNP 300-620 exam questions and answers: https://www.pass4itsure.com/300-620.html (Q&As: 111).

Pass4itSure Cisco CCNP 300-620 dumps come to rescue(Candidates who have difficulty preparing materials), some exam practice questions will be shared for free below ( 300-620 PDF + 300-620 exam online test)

Cisco DCACI 300-620 Exam Dumps PDF Study

Cisco DCACI 300-620 exam pdf free [google drive]:

https://drive.google.com/file/d/1vJKBezyJaLNuU7TrlTlYgwWosbM41Vv-/view?usp=sharing

Up-to-Date Cisco CCNP 300-620 Exam Questions Online Test

QUESTION 1

A situation causes a fault to be raised on the APIC. The ACI administrator does not want that fault to be raised because
it is not directly relevant to the environment. Which action should the administrator take to prevent the fault from
appearing?

A. Under System -> Faults, right-click on the fault and select Acknowledge Fault so that acknowledged faults will
immediately disappear.
B. Create a stats threshold policy with both rising and falling thresholds defined so that the critical severity threshold
matches the squelched threshold.
C. Under System -> Faults, right-click on the fault and select Ignore Fault to create a fault severity assignment policy
that hides the fault.
D. Create a new global health score policy that ignores specific faults as identified by their unique fault code.

Correct Answer: C

QUESTION 2

Which two dynamic routing protocols are supported when using Cisco ACI to connect to an external Layer 3 network?
(Choose two.)

A. iBGP
B. VXLAN
C. IS-IS
D. RIPv2
E. eBGP

Correct Answer: AE

Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/ACI_Best_Practices/b_ACI_Best
_Practices/b_ACI_Best_Practices_chapter_010010.html

QUESTION 3

New ESXi hosts are procured in a data center compute expansion project. An engineer must update the configuration
on the Cisco APIC controllers to support the addition of the new servers to the existing VMM domain. Which action
should be taken to support this change?

A. Create a range of internal VLANs in the associated VLAN pool.
B. Set the encapsulation mode as VXLAN.
C. Enable infrastructure VLAN in the associated AEP.
D. Map the leaf interface selector to the AEP that is associated with the VMM domain.

Correct Answer: D

QUESTION 4

DRAG-DROP
An engineer is configuring a VRF for a tenant named Cisco. Drag and drop the child objects on the left onto the correct
containers on the right for this configuration.

Correct Answer:

QUESTION 5

An engineer configured Layer 2 extension from the ACI fabric and changed the Layer 2 unknown unicast policy from
Flood to Hardware Proxy. How does this change affect the flooding of the L2 unknown unicast traffic?

A. It is forwarded to one of the spines to perform as a spine proxy.
B. It is flooded within the whole fabric.
C. It is dropped by the leaf when the destination endpoint is not present in the endpoint table.
D. It is forwarded to one of the APICs to perform as a proxy.

Correct Answer: A

Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/L2_config/b_Cisco_APIC_Layer_
2_Configuration_Guide/b_Cisco_APIC_Layer_2_Configuration_Guide_chapter_010.html

QUESTION 6

An engineer wants to filter the System Faults page and view only the active faults that are present in the Cisco ACI
fabric. Which two lifecycle stages must be selected for filtering? (Choose two.)

A. Raised
B. Retaining
C. Soaking, Clearing
D. Raised, Clearing
E. Soaking

Correct Answer: AD

Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/all/faults/guide/b_APIC_Faults_Error
s/b_IFC_Faults_Errors_chapter_01.html

QUESTION 7

Which type of policy configures the suppression of faults that are generated from a port being down?

A. fault lifecycle assignment
B. event lifecycle assignment
C. fault severity assignment
D. event severity assignment

Correct Answer: C

Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/all/faults/guide/b_APIC_Faults_Error
s/b_IFC_Faults_Errors_chapter_01.html

QUESTION 8

What are two requirements for the IPN network when implementing a Multi-Pod ACI fabric? (Choose two.)

A. EIGRP routing
B. PIM ASM multicast routing
C. BGP routing
D. VLAN ID 4
E. OSPF routing

Correct Answer: DE

QUESTION 9

What must be configured to allow SNMP traffic on the APIC controller?

A. out-of-band management interface
B. contract under tenant mgmt
C. SNMP relay policy
D. out-of-band bridge domain

Correct Answer: B

QUESTION 10

How is an EPG extended outside of the ACI fabric?

A. Create an external bridged network that is assigned to a leaf port.
B. Create an external routed network that is assigned to an EPG.
C. Enable unicast routing within an EPG.
D. Statically assign a VLAN ID to a leaf port in an EPG.

Correct Answer: D

Reference: https://www.dclessons.com/l2-external-network-with-aci

QUESTION 11

DRAG-DROP
Drag and drop the Cisco ACI Layer 4 to Layer 7 service insertion terms on the left to the correct descriptions on the
right.

Select and Place:

Correct Answer:

QUESTION 12

Which method does the Cisco ACI fabric use to load-balance multidestination traffic?

A. forwarding tag trees
B. PIM routing
C. spanning trees
D. shortest-path trees

Correct Answer: A

Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/aci-fundamentals/b_ACIFundamentals/b_ACI-Fundamentals_chapter_010010.html

QUESTION 13

An engineer is implementing Cisco ACI at a large platform-as-a-service provider using APIC controllers, 9396PX leaf
switches, and 9336PQ spine switches. The leaf switch ports are configured as IEEE 802.1p ports. Where does the
traffic exit from the EPG in IEEE 802.1p mode in this configuration?

A. from leaf ports tagged as VLAN 0
B. from leaf ports untagged
C. from leaf ports tagged as VLAN 4094
D. from leaf ports tagged as VLAN 1

Correct Answer: A

QUESTION 14

Refer to the exhibit. Which two components should be configured as route reflectors in the ACI fabric? (Choose two.)

A. Spine1
B. apic1
C. Spine2
D. Leaf1
E. Leaf2
F. apic2

Correct Answer: AC

QUESTION 15

Which table holds IP address, MAC address, and VXLAN/VLAN information on a Cisco ACI leaf?

A. endpoint
B. adjacency
C. RIB
D. ARP

Correct Answer: A

Reference: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centricinfrastructure/white-paper-c11-739989.html

Study hard every day, with the help of dumps, you will be able to pass Implementing Cisco Application Centric Infrastructure (DCACI) easily!

In conclusion:

Here are the Cisco CCNP 300-620 exam study tips and some free dumps information, all for you to pass the exam smoothly and easily! Pass4itSure has created questions and answers that are closest to the original 300-620 exam questions, which will help you pass the Implementing Cisco Application Centric Infrastructure (DCACI) exam easily and happily!

Pass4itSure’s latest 300-620 dumps are clicked here https://www.pass4itsure.com/300-620.html (PDF + VCE) giving them more confidence in Cisco’s true exam day.