This article starts with the history of the Cisco 500–220 exam, introduces you to the 500–220 ECMS exam and how to pass it, and shares the latest 500–220 study resources, the 500-220 exam study guide.
It’s all about helping you pass your exams and get your job quickly.
History of the Cisco 500–220 (Certified 500–220 ECMS)
Emergence – Cyber threats are becoming more challenging, so effective measures must be taken to expand network security and management. That’s when the Cisco Meraki Solutions Specialist Certified (500–220 ECMS) came in.
Development – Cisco Meraki stands out as a reliable brand in the field of cybersecurity and direction. The related certification is the Cisco Meraki Solution Specialist certification, which is earned by passing the Cisco 500-220 ECMS exam.
Pinnacle – In 2024, there will be a growing demand for advanced solutions as the business expands and grows. The importance of technology and networks in an organization’s day-to-day operations is highlighted. More and more people want to earn the Cisco Meraki Solutions Specialist certification through the Cisco 500-220 exam.
What is the 500–220 exam?
The 500-220 ECMS Engineering Cisco Meraki Solution is a 90-minute test with 55–65 questions and a variable passing score (about 750-850 / 1000).
Focuses on the knowledge and skills to design Meraki solutions, including cloud management (15%), design (30%), implementation (25%), monitoring and troubleshooting (30%).
Various aspects are also covered, such as cloud networking, security, wireless configuration, and other relevant technologies in the IT environment. To succeed on the exam, you’ll need to complete the Cisco Meraki Engineering Solutions Part 1 and Part 2 courses, as well as a few additional learning materials.
Help you study for the 500-220 exam study guide
There are some guidelines to follow while taking the Cisco 500-220 exam, here are some to help you prepare for the exam:
| Study through the 500–220 ECMS exam objectives. |
| Find as many study materials as possible, the more the merrier. |
| Take the Cisco 500–220 exam practice online. |
| It is necessary to have a strong sense of time and a positive attitude. |
Official, third-party resources are desirable, and more, more comprehensive resources are the key to success in the Cisco 500-220 exam.
You can check out some of the 500–220 resources I’ve integrated below:
Official (with link):
- Exam Self-study Guide
- Exam Self-study Lab Supplement
- CMSS At A Glance
- CMSS FAQ
- 500-220 ECMS Exam: Cisco Meraki Solutions Specialist
- Cisco Meraki Solution Specialist Training Videos
- Cisco Meraki Solutions Specialist Certification (CMSS)
Third-party: Cisco 500–220 practice tests (online exercises, videos, books, etc.)
Pass4itSure Cisco Technologists have collected 72 questions and answers for the Cisco Meraki Solution Specialist – Cisco 500–220 Exam designed to cover all the exam knowledge points and empower candidates. With the Pass4itSure 500-220 practice test, you can easily pass the exam, earn a Cisco certification, and go further on your Cisco career path.
Take the Cisco 500–220 exam practice online for free
Question 1:
Refer to the exhibit. During a Meraki AP deployment, the default SSID that the exhibit shows is broadcast. What causes this behavior?
A. An AP does not have a wired connection to the network.
B. An AP cannot connect to the default gateway.
C. An AP has never connected to the Meraki Cloud Controller.
D. An AP has Site Survey mode enabled.
Correct Answer: B
Question 2:
What are two ways peers interact with ports that Auto VPN uses? (Choose two.)
A. For IPsec tunneling, peers use high UDP ports within the 32768 to 61000 range.
B. Peers contact the VPN registry at UDP port 9350.
C. For IPsec tunneling, peers use high TCP ports within the 32768 to 61000 range.
D. Peers contact the VPN registry at TCP port 9350.
E. For IPsec tunneling, peers use UDP ports 500 and 4500.
Correct Answer: AB
Question 3:
DRAG DROP
Drag and drop the descriptions from the left onto the corresponding MX operation mode on the right.
Select and Place:
Correct Answer:
Question 4:
What is a feature of distributed Layer 3 roaming?
A. An MX Security Appliance is not required as a concentrator.
B. An MX Security Appliance is required as a concentrator.
C. All wireless client traffic can be split-tunneled.
D. All wireless client traffic is tunneled.
Correct Answer: A
Question 5:
When wireless SSIDs are configured in the Dashboard, which setting on the Access Control page affects the ability of a 2.4 GHz-only client device from associating to the WLAN for the first time?
A. Content filtering
B. Bridge mode
C. 802.11r
D. Dual band operating with Band Steering
Correct Answer: D
Question 6:
Refer to the exhibit. For an AP that displays this alert, which network access control method must be in use?
A. preshared key
B. WPA2-enterprise with my RADIUS server
C. splash page with my RADIUS server
D. MAC-based access control with RADIUS server
Correct Answer: A
Question 7:
Refer to the exhibit. Assuming this MX has established a full tunnel with its VPN peer, how will the MX route the WebEx traffic?
A. WebEx traffic will prefer WAN 2 as long as it meets the thresholds in the “Conf” performance class.
B. WebEx traffic will prefer WAN 1 as it is the primary uplink.
C. WebEx traffic will prefer WAN 2 as long as it is up.
D. WebEx traffic will be load-balanced between both active WAN links.
Correct Answer: A
Question 8:
DRAG DROP
Drag and drop the steps from the left into the sequence on the right to manage device control, according to Cisco Meraki’s best practice.
Select and Place:
Correct Answer:
Question 9:
Refer to the exhibit. Which IDS/IPS mode is the MX Security Appliance configured for?
A. quarantine
B. prevention
C. detection
D. blocking
Correct Answer: B
Question 10:
What are the two roles of the network and device tags in a Dashboard? (Choose two.)
A. Tags enable administrators to configure a combination of network and device-specific tags to create summary reports filtered for specific devices across multiple networks.
B. Network tags can be used to assign networks to separate Auto VPN domains in an Organization with many networks.
C. Network tags can be used to simplify the assignment of network-level permissions in an Organization with many networks.
D. Device tags can be used to simplify the assignment of device-level permissions in an Organization with many administrators.
E. Device tags can be assigned to MR APs to influence the gateway selection for repeaters in a mesh wireless network.
Correct Answer: AE
Question 11:
Refer to the exhibit. A packet arrives on the VPN concentrator with source IP 10.168.70.3 and is destined for IP 10.116.32.4.
What is the next hop for the packet, based on this concentrator routing table?
A. The concentrator gateway (10.128.124.62) is the next hop.
B. Not enough detail is available to determine the next hop.
C. The packet is stopped.
D. The Auto VPN peer “Store 1532 ? appliance” is the next hop.
Correct Answer: B
Question 12:
Which API endpoint clones a new Organization?
A. POST /organizations/clone/{organizationId}
B. PUT /organizations/{organizationId}/clone
C. POST /organizations/{organizationId}/new
D. POST /organizations/{organizationId}/clone
Correct Answer: D
Question 13:
Which Cisco Meraki product must be deployed in addition to Systems Manager so that Systems Manager Sentry enrollment can be used?
A. MS Switch
B. Meraki Insight
C. MR Access Point
D. MV Smart Camera
Correct Answer: C
Reference: https://meraki.cisco.com/blog/tag/systems-manager/page/4/
Question 14:
Refer to the exhibit. The VPN concentrator is experiencing issues. Which action should be taken to ensure a stable environment?
A. Add a deny any/any firewall rule to the end of the firewall rules.
B. Remove the connection from the Internet 1.
C. Physically disconnect all LAN ports.
D. Configure the MX appliance to Routed mode on the Addressing and VLANS page.
Correct Answer: C
Question 15:
Refer to the exhibit. Which two actions are required to optimize load balancing asymmetrically with a 4:1 ratio between links? (Choose two.)
A. Change the primary uplink to “none”.
B. Add an internet traffic preference that defines the load-balancing ratio as 4:1.
C. Enable load balancing.
D. Set the speed of the cellular uplink to zero.
E. Change the assigned speeds of WAN 1 and WAN 2 so that the ratio is 4:1.
Correct Answer: C
Pass4itSure 500–220 Exam Practice Materials Q&As: 72
For the last updated 500-220 exam questions, click here.
It is necessary to have a strong sense of time and a positive attitude
It’s important to manage your time, after all, exam time is limited. Allocate your time wisely to better prepare for the exam. The same mindset is also very important, you will inevitably encounter difficulties in the exam, and you must be patient to solve them. Be sure to maintain a positive attitude throughout the exam.
If you do the above, you will have no problem passing the exam.
After the certification of Sisco Merachiso Lution Specialist
There are 112 Cisco Meraki Solutions Specialist positions available on Indeed.com.
linkedin.com 263,863 followers of Cisco Meraki.
What can you see? Judging from this data, a good job is waiting for you with certification.
Conclusion
It is feasible to use this guidance to get a Cisco Meraki Solutions Specialist. Be sure to practice as much as you can, Pass4itSure 500–220 exam practice material https://www.pass4itsure.com/500-220.html can help you focus, enhance your sense of time, and maintain a positive mindset, and you will definitely succeed. Good luck!
