How to try to pass the Cisco Supporting Cisco Data Center System Devices 010-151 exam

Has anyone tried the Cisco 010-151 exam? Use Pass4itSure 010-151 dumps to easily prepare and pass everything you need for the Cisco CCT certification exam. The latest updated Cisco CCT 010-151 exam dumps contain PDF and VCE: https://www.pass4itsure.com/010-151.html Q&As: 136. Here you will find the latest Cisco 010-151 practical exam questions for free.

[Cisco CCT 010-151 PDF] Cisco 010-151 pdf free (Drive)

Free Cisco 010-151 pdf download https://drive.google.com/file/d/1Txhuc6PaXdR–7drw85uwuvTZxpOsOga/view?usp=sharing

[free 010-151 practice test] Free sharing of Cisco CCT 010-151 exam questions and answers

QUESTION 1
Which two statements about Cisco UCS 6454 Fabric Interconnect are true? (Choose two.)
A. 1-RU 10/25/40/100/200/400 Gigabit Ethernet, FCoE, and Fibre Channel switch offers up to 32 ports.
B. It hosts and runs Cisco Integrated Management Controller (CIMC).
C. All Ethernet ports can support FCoE.
D. Provides the management and communication backbone for the Cisco UCS 5108 Server Chassis and Cisco UCS BSeries Blade Servers only.
E. Provides both the LAN and SAN connectivity for all servers within its domain.
Correct Answer: CE
Reference: https://www.cdw.com/product/cisco-ucs-6454-fabric-interconnect-switch-54-ports-managed-rackmou/5400879

QUESTION 2
Which statement is true about QSFP?
A. The four 10 Gbit/sec channels that QSFP+ supports can be combined into a single 40 Gigabit Ethernet link.
B. QSFP-DD stands for Quad Small Form Factor Pluggable Double Distance.
C. The QSFP+ offers higher data speed than QSFP28.
D. 100GBASE-SR4 supports a much longer distance than 100GBASE-LR4.
Correct Answer: A

QUESTION 3
Which three statements about FCoE are true? (Choose three.)
A. Allows Fibre Channel and Ethernet networks to share a single, integrated infrastructure.
B. Encapsulates Fibre Channel frames into Ethernet frames, which allows them to run alongside traditional IP traffic.
C. Increases capital costs due to the difficulty to manage.
D. Consolidates I/O traffic in the data center.
Correct Answer: ABD

QUESTION 4
Which command saves the active configuration to NVRAM?
A. copy startup-config running-config
B. copy active-config backup-config
C. copy running-config startup-config
D. copy backup-config active-config
Correct Answer: C

QUESTION 5
Which two Cisco Nexus switches provide the foundation of the Cisco Application Centric Infrastructure? (Choose two.)
A. Cisco Nexus 7718 switch
B. Cisco Nexus 9508 switch
C. Cisco Nexus 7710 switch
D. Cisco Nexus 93128TX switch
E. Cisco Nexus 6004 switch
Correct Answer: BD

QUESTION 6
When the Cisco UCS Manager is used to verify the B- or C-Series device, which two types of Overall Status are
acceptable and do not indicate a failure? (Choose two.)
A. Online
B. OK
C. Unassociated
D. Active
Correct Answer: BC

QUESTION 7

Refer to the exhibit. Which two faults can occur if the System Health LED is in a steady amber state? (Choose two.)
A. At least one DIMM is faulty.
B. Major fault with CPU
C. Major fault with the system board
D. CPU mismatch
E. Major fault with memory DIMM
Correct Answer: BE

QUESTION 8
What is the correct path to verify the Overall Status of Chassis 1 | Server 3?
A. Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 Status tab
B. Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 General tab
C. Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 FSM tab
D. Servers Tab > Chassis > Server 3 General tab
E. Status Tab > Chassis > Chassis 1 > Servers > Server 3
F. Admin Tab > Chassis > Chassis 1 > Servers > Server 3 General tab
Correct Answer: B

QUESTION 9
Which three firmware components does the Host Upgrade Utility upgrade? (Choose three.)
A. Fabric Interconnect firmware
B. LAN on Motherboard
C. Cisco UCS Manager
D. CIMC
E. System BIOS
Correct Answer: BDE

QUESTION 10
Which NX-OS command is used to display the boot variable configuration?
A. display boot
B. open boot
C. show config
D. show boot
Correct Answer: D
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus7000/sw/fundamentals/command/reference/fnd_cmd/fnd_commands.html

QUESTION 11
What are the two layers in the SAN hierarchy? (Choose two.)
A. Protocol layer
B. Fabric layer
C. Connection layer
D. Switch layer
E. Storage layer
Correct Answer: CE

QUESTION 12
Which tool does a network administrator not need when installing hardware?
A. cable tester
B. wrench set
C. cable wraps
D. needle-nose pliers
E. PCMCIA memory
F. soldering iron with grounded tip
Correct Answer: F

QUESTION 13
Which type of connection across the network does a SAN allow for multiple servers to access an unlimited amount of
storage devices?
A. any-to-many
B. many-to-any
C. any-to-any
D. any-to-one
E. one-to-any
F. one-to-one
Correct Answer: C

QUESTION 14
Which type of optics module is supported by a 6-port 40 GE Cisco Nexus 7000 M2 Series I/O module?
A. CPAK
B. QSFP+
C. SFP/SFP+
D. CFP
Correct Answer: B

QUESTION 15
Which two form factors are available in the Cisco UCS E-Series Servers? (Choose two.)
A. EHWIC
B. PVDM
C. NIM
D. VIC
E. WIC
Correct Answer: AC
Reference: https://www.cisco.com/c/dam/global/de_de/products/servers-unified-computing/productlisting/pdf/data_sheet_c78-705787.pdf

Get the latest Cisco CCT 010-151 exam dumps to help you pass the exam easily! Complete Cisco 010-151 exam questions and answers: https://www.pass4itsure.com/010-151.html(PDF + VCE). Real Cisco CCT Data Center 010-151 exam questions, practice test, exam dumps, study guide! Believe it, learn, and wish you success soon.