How long did you spend preparing for the Cisco CCNA 200-301 exam

For those who take the 200-301 exam, it is a great test. After all, passing the exam is really a comprehensive test of mastering skills. Many test takers are asking me: How long have you been preparing for the Cisco CCNA 200-301 exam? In order to solve this confusion, from today on, I will share my experience according to my own experience, for your reference. Specific times vary from person to person. I can’t answer that. But I can tell you explicitly that the Pass4itSure 200-301 dumps are efficient in preparing for the 200-301 exam. I mean, the Cisco CCNA 200-301 dumps can improve your learning efficiency and help you take exams quickly!

Get the latest Cisco 200-301 exam dumps to help you pass the exam easily!

Get the latest Cisco 200-301 exam dumps to help you pass the exam easily!

Get the latest Cisco 200-301 exam dumps to help you pass the exam easily!

The important things to say three times!

Pass4itSure has the most complete exam policy! 98% pass rate. To pass the Cisco 200-301 exam, please click https://www.pass4itsure.com/200-301.html (Total Questions: 598 Q&A)

The latest updated Cisco CCNA 200-301 exam dumps contain PDF and VCE.
All test questions have been corrected and updated to ensure 100% validity.

Get free Cisco 200-301 exam dumps PDF online

[free 200-301 PDF] https://drive.google.com/file/d/1CG47s72p_Bhcx34l7qH98YiJjoN35xLG/view?usp=sharing

PDF is a very popular learning tool that you can download online. Latest free Cisco 200-301 exam PDF from Pass4itSure 200-301 dumps!

Free Cisco CCNA 200-301 trial test (13 questions)

QUESTION 1

DRAG-DROP

Refer to the exhibit. Drag and drop the networking parameters from the left onto the correct values on the right.
Select and Place:

Correct Answer:

The “IP route” and “IP addr show eth1” are Linux commands.
1.
“IP route”: display the routing table
2.
“IP address show eth1”: get depth information (only on eth1 interface) about your network interfaces like IP Address, MAC
Address information

QUESTION 2

Which attribute does a router use to select the best path when two or more different routes to the same destination exist from two different routing protocols?
A. dual algorithm
B. metric
C. administrative distance
D. hop count
Correct Answer: C

Administrative distance is the feature used by routers to select the best path when there are two or more different routes
to the same destination from different routing protocols. Administrative distance defines the reliability of a routing
protocol.

QUESTION 3

A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to
select the best path?
A. as-path
B. administrative distance
C. metric
D. cost
Correct Answer: C

If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is
better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number
is
better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
Reference: https://study-ccna.com/administrative-distance-metric/

QUESTION 4

An engineer is configuring switch SW1 to act as an NTP server when all upstream NTP server connectivity fails. Which
configuration must be used?
A. SW1# config t SW1(config)#ntp peer 192.168.1.1 SW1(config)#ntp access-group peer accesslist1
B. SW1# config t SW1(config)#ntp master SW1(config)#ntp server192.168.1.1
C. SW1# config t SW1(config)#ntp backup SW1(config)#ntp server192.168.1.1
D. SW1# config t SW1(config)#ntp server192.168.1.1 SW1(config)#ntp access-group peer accesslist1
Correct Answer: D

QUESTION 5

What protocol allows an engineer to back up 20 network router configurations globally while using the copy function?
A. SMTP
B. SNMP
C. TCP
D. FTP
Correct Answer: B

QUESTION 6

When a switch receives a frame for a known destination MAC address, how is the frame handed?
A. sent to the port identified for the known MAC address
B. broadcast to all ports
C. forwarded to the first available port
D. flooded to all ports except the one from which it originated
Correct Answer: C

QUESTION 7

Which cloud service model does the engineer recommend?
A. infrastructure-as-a-service
B. platform-as-a-service
C. business process as service to support different types of service
D. software-as-a-service
Correct Answer: D

QUESTION 8

What must be considered when using 802:11 ta?
A. It is compatible with 802 lib- and 802 11-compliant wireless devices
B. It is used in place of 802 11b/g when many non-overlapping channels are required
C. It is susceptible to interference from 2 4 GHz devices such as microwave ovens.
D. It is chosen over 802 11b/g when a lower-cost solution is necessary
Correct Answer: A

QUESTION 9

Which two goals reasons to implement private IPv4 addressing on your network? (Choose two.)
A. Comply with PCI regulations
B. Conserve IPv4 address
C. Reduce the size of the forwarding table on network routers
D. Reduce the risk of a network security breach
E. Comply with local law
Correct Answer: BD

QUESTION 10

Refer to the exhibit. Which outcome is expected when PC_A sends data to PC_B?
A. The switch rewrites the source and destination MAC addresses with its own
B. The source and destination MAC addresses remain the same
C. The source MAC address is changed
D. The destination MAC address is replaced with ffff.ffff.ffff
Correct Answer: B

QUESTION 11

A network engineer must configure the router R1 GigabitEthernet1/1 interface to connect to the router R2
GigabitEthernet1/1 interface. For the configuration to be applied the engineer must compress the address
2001:0db8:0000:0000:0500:000a:400F:583B. Which command must be issued on the interface?
A. ipv6 address 2001:0db8::5: a: 4F 583B
B. ipv6 address 2001:db8::500:a:400F:583B
C. ipv6 address 2001 db8:0::500:a:4F:583B
D. ipv6 address 2001::db8:0000::500:a:400F:583B
Correct Answer: B

QUESTION 12

What describes the operation of virtual machines?
A. Virtual machines are responsible for managing and allocating host hardware resources
B. In a virtual machine environment, physical servers must run one operating system at a time.
C. Virtual machines are the physical hardware that supports a virtual environment.
D. Virtual machines are operating system instances that are decoupled from server hardware
Correct Answer: D

QUESTION 13

An organization has decided to start using cloud-provided services. Which cloud service allows the organization to
install its own operating system on a virtual machine?
A. platform-as-a-service
B. network-as-a-service
C. software-as-a-service
D. infrastructure-as-a-service
Correct Answer: D

Below are the 3 cloud supporting services cloud providers provide to customers:
1. SaaS (Software as a Service): SaaS uses the web to deliver applications that are managed by a third-party vendor and
whose interface is accessed on the clients’ side. Most SaaS applications can be run directly from a web browser
without any downloads or installations required, although some require plugins.

2. PaaS (Platform as a Service): is used for applications, and other development, while providing cloud components to
software. What developers gain with PaaS is a framework they can build upon to develop or customize applications.
PaaS makes the development, testing, and deployment of applications quick, simple, and cost-effective. With this
technology, enterprise operations, or a third-party provider, can manage OSes, virtualization, servers, storage,
networking, and the PaaS software itself. Developers, however, manage the applications.

3. IaaS (Infrastructure as a Service): self-service models for accessing, monitoring, and managing remote datacenter
infrastructures, such as compute (virtualized or bare metal), storage, networking, and networking services (e.g.
firewalls). Instead of having to purchase the hardware outright, users can purchase IaaS based on consumption, similar to electricity or other utility billing.
In general, IaaS provides hardware so that an organization can install its own operating system.

Summary

This blog shares part of the Cisco 200-301 exam PDF and online simulation tests. This content is part of the Pass4itSure CCNA 200-301 dumps!
You can access Pass4itSure for the full Cisco 200-301 exam dumps https://www.pass4itsure.com/200-301.html (PDF plus VCE). Pass your exam quickly.