The latest updated 300-710 SNCF exam questions are from the Pass4itSure 300-710 SNCF dumps.
Exampass.net shares some of the latest updated 300-710 SNCF dumps exam questions for free, you can take the free online practice test q1-q12 or get the 300-710 SNCF pdf we provide to help you improve your skills.
To pass the Cisco 300-710 SNCF exam, these questions alone are not enough, you need to get a complete 300-710 SNCF dumps https://www.pass4itsure.com/300-710.html (including 219 real 300-710 SNCF exam questions).
Next, start your free Cisco 300-710 SNCF dumps online practice test tour:
1# Cisco 300-710 SNCF
Which firewall design allows a firewall to forward traffic at layer 2 and layer 3 for the same subnet?
A. Cisco Firepower Threat Defense mode
B. transparent mode
C. routed mode
D. integrated routing and bridging
Correct Answer: A
2# Cisco 300-710 SNCF
When do you need the file-size command option during troubleshooting with packet capture?
A. when capture packets are less than 16 MB
B. when capture packets are restricted from the secondary memory
C. when capture packets exceed 10 GB
D. when capture packets exceed 32 MB
Correct Answer: D
3# Cisco 300-710 SNCF
A VPN user is unable to conned lo web resources behind the Cisco FTD device terminating the connection. While troubleshooting, the network administrator determines that the DNS responses are not getting through the Cisco FTD
What must be done to address this issue while still utilizing Snort IPS rules?
A. Uncheck the “Drop when Inline” box in the intrusion policy to allow the traffic.
B. Modify the Snort rules to allow legitimate DNS traffic to the VPN users.
C. Disable the intrusion rule threshes to optimize the Snort processing.
D. Decrypt the packet after the VPN flow so the DNS queries are not inspected
Correct Answer: B
4# Cisco 300-710 SNCF
Which two conditions must be met to enable high availability between two Cisco FTD devices? (Choose two.)
A. same flash memory size
B. same NTP configuration
C. same DHCP/PPPoE configuration
D. same hostname
E. same number of interfaces
Correct Answer: BE
5# Cisco 300-710 SNCF
Which action should be taken after editing an object that is used inside an access control policy?
A. Delete the existing object in use.
B. Refresh the Cisco FMC GUI for the access control policy.
C. Redeploy the updated configuration.
D. Create another rule using a different object name.
Correct Answer: C
6# Cisco 300-710 SNCF
Which two OSPF routing features are configured in Cisco FMC and propagated to Cisco FTD? (Choose two.)
A. OSPFv2 with IPv6 capabilities
B. virtual links
C. SHA authentication to OSPF packets
D. area boundary router type 1 LSA filtering
E. MD5 authentication to OSPF packets
Correct Answer: BE
7# Cisco 300-710 SNCF
An engineer configures a network discovery policy on Cisco FMC. Upon configuration, it is noticed that excessive and misleading events are filling the database and overloading the Cisco FMC. A monitored NAT device is executing multiple updates of its operating system in a short period of time. What configuration change must be made to alleviate this issue?
A. Exclude load balancers and NAT devices.
B. Leave default networks.
C. Increase the number of entries on the NAT device.
D. Change the method to TCP/SYN.
Correct Answer: A
8# Cisco 300-710 SNCF
Which command should be used on the Cisco FTD CLI to capture all the packets that hit an interface?
A. configure core dump packet-engine enable
B. capture-traffic
C. capture
D. capture WORD
Correct Answer: B
9# Cisco 300-710 SNCF
A network administrator notices that SI events are not being updated. The Cisco FTD device is unable to load all of the SI event entries and traffic is not being blocked as expected. What must be done to correct this issue?
A. Restart the affected devices in order to reset the configurations.
B. Redeploy configurations to affected devices so that additional memory is allocated to the SI module.
C. Replace the affected devices with devices that provide more memory.
D. Manually update the SI event entries to that the appropriate traffic is blocked.
Correct Answer: D
10# Cisco 300-710 SNCF
Which policy rule is included in the deployment of a local DMZ during the initial deployment of a Cisco NGFW through the Cisco FMC GUI?
A. a default DMZ policy for which only a user can change the IP addresses.
B. deny ip any
C. no policy rule is included
D. permit ip any
Correct Answer: C
11# Cisco 300-710 SNCF
Which protocol establishes network redundancy in a switched Firepower device deployment?
A. STP
B. HSRP
C. GLBP
D. VRRP
Correct Answer: A
12# Cisco 300-710 SNCF
Which command is typed at the CLI on the primary Cisco FTD unit to temporarily stop running high-availability?
A. configure high-availability resume
B. configure high-availability disable
C. system support network-options
D. configure high-availability suspend
Correct Answer: B
300-710 SNCF pdf free download:
[google drive] https://drive.google.com/file/d/1xKLbSLz0i3PFm7lToosb1YXrD5QOSke6/view?usp=sharing
Pass4itSure 300-710 SNCF dumps the latest version has been updated https://www.pass4itsure.com/300-710.html (PDF+VCE), practice carefully, correct attitude, success is at hand.
The latest 300-710 SNCF dumps help you pass the exam easily.
Previous Cisco 300-710 SNCF Exam Practice Questions:
December 24, 2021, https://www.exampass.net/sharing-my-top-1-tips-for-passing-the-cisco-300-710-exam.html
March 15, 2021, https://www.exampass.net/prep-actual-cisco-300-710-exam-questions-for-free-share.html
