Pass4itsure Cisco (CCNA, CCNP, Meraki Solutions Specialist, CCDP…) dumps updates throughout the year and share some exam questions for free to help you 100% pass the exam

[2021.7] Special update! New Prep Actual Cisco 350-501 Exam Questions For Free Share

Valid Cisco 350-501 questions shared by Pass4itsure for helping to pass the Cisco 350-501 exam! Get the newest Pass4itsure Cisco 350-501 exam dumps with VCE and PDF here: https://www.pass4itsure.com/350-501.html (190 Q&As Dumps).

[Free PDF] Cisco 350-501 pdf Q&As https://drive.google.com/file/d/1Op5fOUzFoLbyjWgQfZYBI9Hmw5mcpxj4/view?usp=sharing

Suitable for 350-501 complete Cisco learning pathway

The content is rich and diverse, and learning will not become boring. You can learn in multiple ways through the Cisco 350-501 exam.

  1. Download 
  2. Answer practice questions, the actual Cisco 350-501 test

Cisco 350-501 Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR)

Free Cisco 350-501 dumps download

[PDF] Free Cisco 350-501 dumps pdf download https://drive.google.com/file/d/1Op5fOUzFoLbyjWgQfZYBI9Hmw5mcpxj4/view?usp=sharing

Pass4itsure offers the latest Cisco 350-501 practice test free of charge 1-13

QUESTION 1
Refer to the exhibit.

350-501 exam questions-q1

An engineer configured multicast routing on client\\’s network. What is the effect of this multicast implementation?
A. R2 floods information about R1 throughout the multicast domain.
B. R2 is unable to share information because the ip pirn autorp listener command is missing.
C. R1 floods information about R2 throughout the multicast domain.
D. R2 is elected as the RP for this domain.
Correct Answer: B

QUESTION 2
Which utility must be used to locate MPLS faults?
A. QoS
B. MPLS LSP ping
C. MPLStraceroute
D. EEM
Correct Answer: C

QUESTION 3

350-501 exam questions-q3

Refer to the exhibit. A network operator working for service provider with an employee id: 1234:56:789 applied this
configuration to a router.
Which additional step should the engineer use to enable LDP?
A. Enable MPLS LDP on the interface.
B. Disable Cisco Express Forwarding globally.
C. Delete the static router ID.
D. Configure the both keyword to enable LDP globally.
Correct Answer: A


QUESTION 4
Which configuration enables BGP FlowSpec client function and installation of policies on all local interfaces?
A. flowspec address-family ipv4 local-install interface-all
B. flowspec address-family ipv4 install interface-all local
C. flowspec address-family ipv4 install interface-all
D. flowspec address-family ipv4 local-install all-interface
Correct Answer: A
Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_bgp/configuration/xe-16-6/irg-xe-16-6-book/C3PLBGP-Flowspec-Client.html

QUESTION 5

350-501 exam questions-q5

Refer to the exhibit. What is the URL used for with REST API?
A. It is used to initiate an FTP session to save a running configuration of a device.
B. It is used to send a message to the APIC to perform an operation on a managed object or class operator.
C. It is used to contact a URL filter to determine the efficacy of a web address.
D. It is used to send a TACACS + authentication request to a server.
Correct Answer: B

QUESTION 6

350-501 exam questions-q6

Refer to the exhibit. If router RA is configured as shown, which IPv4 multicast address space does it use?
A. 224.0.0.0/8
B. 225.0.0.0/8
C. 232.0.0.0/8
D. 239.0.0.0/8
Correct Answer: C
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/3se/multicast/configuration_guide/b_mc_3se_3850_cg/b_mc_3se_3850_cg_chapter_01011.html

QUESTION 7

350-501 exam questions-q7

Refer to the exhibit Which effect of this configuration is true?
A. The two routers fail to form a neighbor relationship because they have different IS-IS area types.
B. The two routers successfully form a neighbor relationship.
C. The two routers fail to form a neighbor relationship because the authentication configuration is missing.
D. The two routers fail to form a neighbor relationship because their system IDs are different.
Correct Answer: B

QUESTION 8

350-501 exam questions-q8

Refer to the exhibit Which effect of this configuration is true?
A. R1 can support a peer that is configured for LDP SSO/NSF as the peer recovers from an outage.
B. R1can support a graceful restart operation on the peer, even if graceful restart is disabled on the peer.
C. R1 can failover to any peer.
D. R1 can failover only to a peer that is configured for LDF SSO/NSF.
Correct Answer: A
Reference: https://www.cisco.com/en/US/docs/general/Test/kwoodwar/fsgr29s.html

QUESTION 9

350-501 exam questions-q9

Refer to the exhibit. Router 1 was experiencing a DDoS attack that was traced to interface gigabitethernet0/1. Which
statement about this configuration is true?
A. Router 1 accepts all traffic that ingresses and egresses interface gigabitethernet0/1.
B. Router 1 drops all traffic that ingresses interface gigabitethernet0/1 that has a FIB entry that exits a different
interface.
C. Router 1 accepts source addresses that have a match in the FIB that indicates it is reachable through a real
interface.
D. Router 1 accepts source addresses on interface gigabitethernet0/1 that are private addresses.
Correct Answer: C
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_1/nxos/security/configuration/guide/sec_nx-os-cfg/sec_urpf.html


QUESTION 10
Which three OSPF parameters must match before two devices can establish an OSPF adjacency? (Choose three.)
A. IP address
B. subnet mask
C. interface cost
D. process ID
E. area number
F. hello timer setting
Correct Answer: BEF

QUESTION 11
What is a role of NSO?
A. It automates the deployment of access points with its built-in wireless LAN controller.
B. It manages WAN infrastructure using a virtual switch.
C. It provides full lifecycle management of a device.
D. It resides on a hypervisor that runs the Windows OS.
Correct Answer: C

QUESTION 12
What does DWDM use to combine multiple optical signals?
A. frequency
B. IP protocols
C. time slots
D. wavelength
Correct Answer: D

QUESTION 13

350-501 exam questions-q13

Refer to the exhibit Router R1 and its peer R2 reside on the same subnet in the network. If an engineer implements this
configuration to R1, how does it make connections to R2?
A. R1 establishes TCP connections that are authenticated with a clear-text password.
B. R1 establishes UDP connections that are authenticated with an MD5 password.
C. R1 establishes UDP connections that are authenticated with a clear-text password.
D. R1 establishes TCP connections that are authenticated with an MD5 password.
Correct Answer: D

Pass4itsure.com offers Questions and Answers that will help you to get well prepared for your CCNP. With our materials, you will sure to pass the exams and get the CCNP certification.

300-815 Exam Questions https://www.exampass.net/update-prep-actual-cisco-300-815-exam-questions-for-free-share.html


300-820 Exam Questions https://www.exampass.net/update-prep-actual-cisco-300-820-exam-questions-for-free-share.html


300-810 Exam Questions https://www.exampass.net/update-prep-actual-cisco-300-810-exam-questions-for-free-share.html

350-401 Exam Questions https://www.exampass.net/update-new-prep-actual-cisco-350-401-exam-questions-for-free-share.html

Summarize:

[Q1-Q13] Free Cisco 350-501 pdf download https://drive.google.com/file/d/1Op5fOUzFoLbyjWgQfZYBI9Hmw5mcpxj4/view?usp=sharing

Share all the resources: Latest Cisco 350-501 practice questions, latest Cisco 350-501 pdf dumps. The latest updated Cisco 350-501 dumps https://www.pass4itsure.com/350-501.html Study hard and practices a lot. This will help you prepare for the Cisco 350-501 exam. Good luck!

Written by

We are here to help you study for Cisco certification exams. We know that the Cisco series (CCNP, CCDE, CCIE, CCNA, DevNet, Special and other certification exams are becoming more and more popular, and many people need them. In this era full of challenges and opportunities, we are committed to providing candidates with the most comprehensive and comprehensive Accurate exam preparation resources help them successfully pass the exam and realize their career dreams. The Exampass blog we established is based on the Pass4itsure Cisco exam dump platform and is dedicated to collecting the latest exam resources and conducting detailed classification. We know that the most troublesome thing for candidates during the preparation process is often the massive amount of learning materials and information screening. Therefore, we have prepared the most valuable preparation materials for candidates to help them prepare more efficiently. With our rich experience and deep accumulation in Cisco certification, we provide you with the latest PDF information and the latest exam questions. These materials not only include the key points and difficulties of the exam, but are also equipped with detailed analysis and question-answering techniques, allowing candidates to deeply understand the exam content and master how to answer questions. Our ultimate goal is to help you study for various Cisco certification exams, so that you can avoid detours in the preparation process and get twice the result with half the effort. We believe that through our efforts and professional guidance, you will be able to easily cope with exam challenges, achieve excellent results, and achieve both personal and professional improvement. In your future career, you will be more competitive and have broader development space because of your Cisco certification.