Exampass – unlimited lifetime access to IT training Exams and Certifications in PDF and Exam Engine formats, along with 1800+ other exams and updates

[2021.6] Update! New Prep Actual Cisco 350-401 Exam Questions For Free Share

Valid Cisco 350-401 questions shared by Pass4itsure for helping to pass the Cisco 350-401 exam! Get the newest Pass4itsure Cisco 350-401 exam dumps with VCE and PDF here: https://www.pass4itsure.com/350-401.html (525 Q&As Dumps).

[Free PDF] Cisco 350-401 pdf Q&As https://drive.google.com/file/d/17Ffa5CpdqCoDBRDc42MPuq_oS8tYLFxJ/view?usp=sharing

Suitable for 350-401 complete Cisco learning pathway

The content is rich and diverse, and learning will not become boring. You can learn in multiple ways through the Cisco 350-401 exam.

  1. Download 
  2. Answer practice questions, the actual Cisco 350-401 test

Cisco 350-401 Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR)

Free Cisco 350-401 dumps download

[PDF] Free Cisco 350-401 dumps pdf download https://drive.google.com/file/d/17Ffa5CpdqCoDBRDc42MPuq_oS8tYLFxJ/view?usp=sharing

Pass4itsure offers the latest Cisco 350-401 practice test free of charge 1-13

QUESTION 1
What is the function of a control-plane node in a Cisco SD-Access solution?
A. to run a mapping system that manages endpoint to network device relationships
B. to implement policies and communicate with networks outside the fabric
C. to connect external Layer 3 networks to the SD Access fabric.
D. to connect APs and wireless endpoints to the SD-Access fabric
Correct Answer: A


QUESTION 2
What is the recommended MTU size for a Cisco SD-Access Fabric?
A. 1500
B. 9100
C. 4464
D. 17914
Correct Answer: B
VXLAN adds 50 bytes to the original packet. The common denominator and recommended MTU value available on
devices operating in a fabric role is 9100. Network should have a minimum starting MTU of at least 1550 bytes to
support the
fabric overlay. MTU values between 1550 and 9100 are supported along with MTU values larger than 9100 though there
may be additional configuration and limitations based on the original packet size.
MTU 9100 is provisioned as part of LAN Automation. Devices in the same routing domain and Layer 2 domain should
be configured with a consistent MTU size to support routing protocol adjacencies and packet forwarding without
fragmentation.


QUESTION 3
Refer to the exhibit.

350-401 exam questions-q3

All switches are configured with the default port priority value. Which two commands ensure that traffic from PC1 is
forwarded over Gi1/3 trunk port between DWS1 and DSW2? (Choose two)
A. DSW2(config-if)#spanning-tree port-priority 128
B. DSW2(config-if)#spanning-tree port-priority 16
C. DSW2(config-if)#interface gi1/3
D. DSW1(config-if)#interface gi1/3
E. DWS1(config-if)#spanning-tree port-priority 0
Correct Answer: BC

QUESTION 4
Refer to exhibit.

350-401 exam questions-q4

What are two reasons for IP SLA tracking failure? (Choose two )
A. The destination must be 172.30 30 2 for icmp-echo
B. The threshold value is wrong
C. A route back to the R1 LAN network is missing in R2
D. The source-interface is configured incorrectly.
E. The default route has the wrong next hop IP address
Correct Answer: CD


QUESTION 5
Refer to the exhibit.

350-401 exam questions-q5

MTU has been configured on the underlying physical topology, and no MTU command has been configured on the
tunnel interfaces. What happens when a 1500-byte IPv4 packet traverses the GRE tunnel from host X to host Y,
assuming the DF bit is cleared?
A. The packet arrives on router C without fragmentation.
B. The packet is discarded on router A
C. The packet is discarded on router B
D. The packet arrives on router C fragmented.
Correct Answer: D

350-401 exam questions-q5-2

QUESTION 6
Which two LISP infrastructure elements are needed to support LISP to non-LISP internetworking? (Choose two)
A. PETR
B. PITR
C. MR
D. MS
E. ALT
Correct Answer: AC


QUESTION 7
Refer to the exhibit.

350-401 exam questions-q7

A network architect has partially configured static NAT. which commands should be asked to complete the
configuration?

350-401 exam questions-q7-2

A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: B


QUESTION 8
What is the purpose of an RP in PIM?
A. send join messages toward a multicast source SPT
B. ensure the shortest path from the multicast source to the receiver.
C. receive IGMP joins from multicast receivers.
D. secure the communication channel between the multicast sender and receiver.
Correct Answer: C

QUESTION 9
What is used to measure the total output energy of a Wi-Fi device?
A. dBi
B. EIRP
C. mW
D. dBm
Correct Answer: C
Output power is measured in mW (milliwatts). answer \\’dBi\\’ milliwatt is equal to one thousandth (10-3) of a watt.


QUESTION 10
DRAG DROP
Drag and drop the solutions that comprise Cisco Cyber Threat Defense from the left onto the objectives they accomplish
on the right.
Select and Place:

350-401 exam questions-q10

 

QUESTION 11
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path
algorithm uses?
A. weight. AS path, local preference. MED
B. weight, local preference AS path, MED
C. local preference weight AS path, MED
D. local preference, weight MED, AS path
Correct Answer: B
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External > IGP Cost >
eBGP Peering > Router ID


QUESTION 12
DRAG DROP
Drag and drop the description from the left onto the correct QoS components on the right.
Select and Place:

350-401 exam questions-q12

Correct Answer:

350-401 exam questions-q12-2

Traffic Policing: Drops excessive Traffic, causes TCP retransmissions, introduce no delay/jitter Shaping: buffers,
excessive traffic, introduce delay and jitter, typically delays, rather than drops traffic


QUESTION 13
How does QoS traffic shaping alleviate network congestion?
A. It drops packets when traffic exceeds a certain bitrate.
B. It buffers and queue packets above the committed rate.
C. It fragments large packets and queues them for delivery.
D. It drops packets randomly from lower priority queues.
Correct Answer: B
Traffic shaping retains excess packets in a queue and then schedules the excess for later transmission over increments
of time. The result of traffic shaping is a smoothed packet output rate.

350-401 exam questions-q13

Reference: https://www.cisco.com/c/en/us/support/docs/quality-of-service-qos/qos-policing/19645-policevsshape.html

Pass4itsure.com offers Questions and Answers that will help you to get well prepared for your CCNP. With our materials, you will sure to pass the exams and get the CCNP certification.

300-815 Exam Questions https://www.exampass.net/update-prep-actual-cisco-300-815-exam-questions-for-free-share.html
300-820 Exam Questions https://www.exampass.net/update-prep-actual-cisco-300-820-exam-questions-for-free-share.html
300-810 Exam Questions https://www.exampass.net/update-prep-actual-cisco-300-810-exam-questions-for-free-share.html

Latest Cisco 350-401 exam video

Summarize:

[Q1-Q13] Free Cisco 350-401 pdf download https://drive.google.com/file/d/17Ffa5CpdqCoDBRDc42MPuq_oS8tYLFxJ/view?usp=sharing

Share all the resources: Latest Cisco 350-401 practice questions, latest Cisco 350-401 pdf dumps. The latest updated Cisco 350-401 dumps https://www.pass4itsure.com/350-401.html Study hard and practices a lot. This will help you prepare for the Cisco 350-401 exam. Good luck!